Single-Cavity triangular substrate integrated waveguide bandpass filter with complementary triangular split ring resonator

doi:10.19682/j.cnki.1005-8885.2019.0029

中国邮电高校学报(英文版) ›› 2019, Vol. 26 ›› Issue (5): 94-98.doi: 10.19682/j.cnki.1005-8885.2019.0029

• Others • 上一篇

Single-Cavity triangular substrate integrated waveguide bandpass filter with complementary triangular split ring resonator

Yang Tao1, Yan Yonghong1, Zhang Yue1, Guo Huijuan1, Zhu Yongyuan2, Huang Wei1,3

1. 南京邮电大学
2. 南京大学

收稿日期:2019-01-04 修回日期:2019-07-30 出版日期:2019-10-31 发布日期:2019-11-06
通讯作者: 杨涛 E-mail:iamtyang@njupt.edu.cn
基金资助:
国家自然科学基金;国家级大学生创新创业计划项目;南京邮电大学科研基金;固体微结构国家重点实验室开放课题

Single-Cavity triangular substrate integrated waveguide bandpass filter with complementary triangular split ring resonator

Yang Tao1, Yan Yonghong1, Zhang Yue1, Guo Huijuan1, Zhu Yongyuan2, Huang Wei1,3

Received:2019-01-04 Revised:2019-07-30 Online:2019-10-31 Published:2019-11-06
Contact: Tao YANG E-mail:iamtyang@njupt.edu.cn
Supported by:
National Natural Science Foundation of China; National college students' science and technology innovation training program;Foundation of Nanjing University of Posts and Telecommunications;Foundation of the National Laboratory of Solid State Microstructures

摘要/Abstract

摘要： A novel single-cavity equilateral triangular substrate integrated waveguide (TSIW) bandpass filter (BPF) with a complementary triangular split ring resonator (CTSRR) is designed in this paper. A metallic via-hole is used to split the degenerate modes and adjust the transmission zeros (TZs) properly. Meanwhile, the CTSRR is utilized as a resonator to work together with the degenerate modes of the TSIW cavity. The resonant frequency of the CTSRR can be adjusted by its own size. Meanwhile, a TZ is observed in the lower band due to the CTSRR. Finally, a 16% 3dB fractional bandwidth (FBW) triple-mode TSIW BPF with three TZs in both lower and upper bands is simulated, fabricated, and measured. There is a good agreement between the simulated and measured ones.

关键词: Bandpass filter, Split ring resonator, Substrate integrated waveguide, Transmission zeros

Abstract: A novel single-cavity equilateral triangular substrate integrated waveguide (TSIW) bandpass filter (BPF) with a complementary triangular split ring resonator (CTSRR) is designed in this paper. A metallic via-hole is used to split the degenerate modes and adjust the transmission zeros (TZs) properly. Meanwhile, the CTSRR is utilized as a resonator to work together with the degenerate modes of the TSIW cavity. The resonant frequency of the CTSRR can be adjusted by its own size. Meanwhile, a TZ is observed in the lower band due to the CTSRR. Finally, a 16% 3dB fractional bandwidth (FBW) triple-mode TSIW BPF with three TZs in both lower and upper bands is simulated, fabricated, and measured. There is a good agreement between the simulated and measured ones.

Key words: Bandpass filter, Split ring resonator, Substrate integrated waveguide, Transmission zeros

Yang Tao, Yan Yonghong, Zhang Yue, Guo Huijuan, Zhu Yongyuan, Huang Wei, . Single-Cavity triangular substrate integrated waveguide bandpass filter with complementary triangular split ring resonator[J]. The Journal of China Universities of Posts and Telecommunications, 2019, 26(5): 94-98.

参考文献

1. Deslandes D, Wu K. Single-substrate integration technique of planar circuits and waveguide filters. IEEE Transactions on Microwave Theory and Techniques, 2003, 51(2): 593-596 2. Zhang Q L, Yin W Y, He S L, et al. Compact substrate integrated waveguide (SIW) bandpass filter with complementary split-ring resonators (CSRRs). IEEE Microwave and Wireless Components letters, 2010, 20(8): 426-428 3. Shen W, Sun X W, Yin W Y, et al. A novel single-cavity dual mode substrate integrated waveguide filter with non-resonating node. IEEE Microwave and Wireless Components letters, 2009, 19(6): 368-370 4. Liu Q W, Wang J P, He Y X. Compact balanced bandpass filter using isosceles right triangular patch resonator. IEEE Electronics Letters, 53(4): 253–254 5. Wu L S, Zhou X L, Wei Q F, et al. An extended doublet substrate integrated waveguide (SIW) bandpass filter with a complementary split ring resonator (CSRR). IEEE Microwave and Wireless Components Letters, 2009, 19(2): 777-779 6. Chen X P, Wu K. Substrate integrated waveguide filters: Design techniques and structure innovations. IEEE Microwave Magazine, 2014, 15(6): 121–133 7. Wong S W, Chen R S, Wang K, et al. U-shape slots structure on substrate integrated waveguide for 40-GHz bandpass filter using LTCC technology. IEEE Transactions on Components Packaging and Manufacturing Technology, 2015, 5(1): 128–134 8. Che W Q, Li C, Deng K. A novel bandpass filter based on complementary split rings resonators and substrate integrated waveguide. Microwave and Optical Technology Letters, 2008, 50(3): 699-701 9. Chu P, Hong W, Tuo M G, et al. Dual-mode substrate integrated waveguide filter with flexible response. IEEE Transactions Microwave Theory and Techniques, 2017, 65 (3): 824 - 830 10. Wang C Y. Exact solution of equilateral triangular waveguide. IEEE Electronics Letters, 2010, 46 (13), 925–927 11. Liu Z, Xiao G B, Zhu L. Triple-mode bandpass filters on CSRR-loaded substrate integrated waveguide cavities. IEEE Transactions on Components Packaging and Manufacturing Technology, 2016, 6(7): 1099-1105

Single-Cavity triangular substrate integrated waveguide bandpass filter with complementary triangular split ring resonator

Single-Cavity triangular substrate integrated waveguide bandpass filter with complementary triangular split ring resonator

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价