中国邮电高校学报(英文版) ›› 2016, Vol. 23 ›› Issue (1): 91-96.doi:

• Electromagnetic • 上一篇    

Design of High-Efficiency Broadband Power Amplifier Using Low-Pass Bias Network

俞启进1,于翠屏2,唐碧华3,刘元安2   

  1. 1. 北京邮电大学电子工程学院
    2. 北京邮电大学
    3.
  • 收稿日期:2015-10-09 修回日期:2015-11-17 出版日期:2016-02-26 发布日期:2016-02-28
  • 通讯作者: 俞启进 E-mail:15210835320@163.com
  • 基金资助:

    国家重点基础研究发展计划(973);国家自然基金,重大装备计划;中国国家自然科学基金

Design of High-Efficiency Broadband Power Amplifier Using Low-Pass Bias Network

  • Received:2015-10-09 Revised:2015-11-17 Online:2016-02-26 Published:2016-02-28
  • Contact: Qijin YU E-mail:15210835320@163.com
  • Supported by:

    National Basic Research Program of China;National Natural Science Foundation of China for the Major Equipment Develop;The National Science Foundation of China

摘要:

A novel design of high-efficiency broadband power amplifier (BPA) with the low-pass bias network to enhance the efficiency and output power is presented in this paper. This letter presents an approach to enhance the efficiency and output power of a broadband power amplifier (BPA) by using a low-pass filter as the bias network. Compared with other bias networks, the proposed low-pass bias network shows a smaller baseband impedance, which can reduce the electrical memory effect. While it provides a larger radio frequency (RF) impedance, which can prevent the leakage of the output power from bias network. A BPA with the proposed bias network is designed using commercial GaN device Cree40025F. The designed BPA shows a fractional bandwidth of 40%, from 1.8GHz to 2.7GHz. The measured results exhibit 73.9 % drain efficiency (DE) value with output power of 43.5 dBm at 2.7GHz, which appears an enhancement of 9.5% and 2.5dBm comparing with that adopts LC bias network.

关键词:

broadband

Abstract:

A novel design of high-efficiency broadband power amplifier (BPA) with the low-pass bias network to enhance the efficiency and output power is presented in this paper. This letter presents an approach to enhance the efficiency and output power of a broadband power amplifier (BPA) by using a low-pass filter as the bias network. Compared with other bias networks, the proposed low-pass bias network shows a smaller baseband impedance, which can reduce the electrical memory effect. While it provides a larger radio frequency (RF) impedance, which can prevent the leakage of the output power from bias network. A BPA with the proposed bias network is designed using commercial GaN device Cree40025F. The designed BPA shows a fractional bandwidth of 40%, from 1.8GHz to 2.7GHz. The measured results exhibit 73.9 % drain efficiency (DE) value with output power of 43.5 dBm at 2.7GHz, which appears an enhancement of 9.5% and 2.5dBm comparing with that adopts LC bias network.

Key words:

broadband

中图分类号: