中国邮电高校学报(英文) ›› 2007, Vol. 14 ›› Issue (3): 99-102.doi: 1005-8885 (2007) 03-0099-04

• B3G • 上一篇    下一篇

Improved AGC method for B3G MIMO–OFDM system

YANG Bing; YU He; TAO Xiao-feng   

  1. Wireless Technique Innovation Institute, Beijing University of Posts and Telecommunications, Beijing 100876, China
  • 收稿日期:2006-11-28 修回日期:1900-01-01 出版日期:2007-09-30

Improved AGC method for B3G MIMO–OFDM system

YANG Bing; YU He; TAO Xiao-feng   

  1. Wireless Technique Innovation Institute, Beijing University of Posts and Telecommunications, Beijing 100876, China
  • Received:2006-11-28 Revised:1900-01-01 Online:2007-09-30

摘要:

Automatic gain control (AGC) has an important role in multi-input multi-output–orthogonal frequency-division multiplexing (MIMO–OFDM) system, especially, when receiving antennas are distributed. In recent years, much work has been done on efficiency and simplification of AGC, but few of them are aiming at multiple antennas. This article, on the assumption of ideal AGC for single receiving antenna, analyzes feasible AGC methods for MIMO system from a new aspect, then brings forward three applicable AGC methods: separate automatic gain control, joint automatic gain control, and partly-joint automatic gain control (PJ-AGC). After simulation, when parameters are properly set, PJ-AGC has the best performance and can be applied to B3G MIMO–OFDM system.

关键词:

AGC; MIMO; OFDM; beyond 3G

Abstract:

Automatic gain control (AGC) has an important role in multi-input multi-output–orthogonal frequency-division multiplexing (MIMO–OFDM) system, especially, when receiving antennas are distributed. In recent years, much work has been done on efficiency and simplification of AGC, but few of them are aiming at multiple antennas. This article, on the assumption of ideal AGC for single receiving antenna, analyzes feasible AGC methods for MIMO system from a new aspect, then brings forward three applicable AGC methods: separate automatic gain control, joint automatic gain control, and partly-joint automatic gain control (PJ-AGC). After simulation, when parameters are properly set, PJ-AGC has the best performance and can be applied to B3G MIMO–OFDM system.

Key words:

AGC; MIMO; OFDM; beyond 3G

中图分类号: