中国邮电高校学报(英文)

• Wireless • 上一篇    下一篇

Transmit scheme to improve coverage in simulcast system based on wideband channel measurement in indoor at 6 GHz

辛亮1,张建华2,高军军2,李晓帆2   

  1. 1. 威睿电通
    2. 北京邮电大学
  • 收稿日期:2012-08-03 修回日期:2012-12-03 出版日期:2013-04-30 发布日期:2013-04-26
  • 通讯作者: 辛亮 E-mail:xinliang.jia@163.com
  • 基金资助:

    This work was supported by the National Natural Science Foundation of China (61171105), and China Information Technology Designing & Consulting Institute Ltd (CITC)-School of Information and Communication Engineering (SICE) in BUPT Graduate Innovation Fund for 2011.

Transmit scheme to improve coverage in simulcast system based on wideband channel measurement in indoor at 6 GHz

  • Received:2012-08-03 Revised:2012-12-03 Online:2013-04-30 Published:2013-04-26
  • Contact: Liang XIN E-mail:xinliang.jia@163.com
  • Supported by:

    This work was supported by the National Natural Science Foundation of China (61171105), and China Information Technology Designing & Consulting Institute Ltd (CITC)-School of Information and Communication Engineering (SICE) in BUPT Graduate Innovation Fund for 2011.

摘要:

Array gain would be well exploited to improve power coverage if some powerful multipath components from different radio links can coherently combine at the receiver (Rx). Thus, in this paper, an algorithm is proposed for transmission in simulcast system, where partial channel state information (CSI) is needed. Based on measured multipath channel, performance of the proposed algorithm is evaluated. According to simulation results, the proposed algorithm outperforms the direction summation (DS) scheme and multipath antenna diversity (MAD) algorithm, with 2~4 dB advantage over the latters. Especially in line of sight (LOS) scenario, the advantage is more obvious. Besides, the proposed algorithm brings more gain with increasing number of transmit antennas without additional power. Finally, robustness of the proposed algorithm is examined with imperfect CSI.

关键词:

channel measurement, delay difference, phase rotation, coverage, robustness

Abstract:

Array gain would be well exploited to improve power coverage if some powerful multipath components from different radio links can coherently combine at the receiver (Rx). Thus, in this paper, an algorithm is proposed for transmission in simulcast system, where partial channel state information (CSI) is needed. Based on measured multipath channel, performance of the proposed algorithm is evaluated. According to simulation results, the proposed algorithm outperforms the direction summation (DS) scheme and multipath antenna diversity (MAD) algorithm, with 2~4 dB advantage over the latters. Especially in line of sight (LOS) scenario, the advantage is more obvious. Besides, the proposed algorithm brings more gain with increasing number of transmit antennas without additional power. Finally, robustness of the proposed algorithm is examined with imperfect CSI.

Key words:

channel measurement, delay difference, phase rotation, coverage, robustness